Precautions for daily maintenance of carving and milling machines

1. Before using the engraving and milling machine, check the temperature and storage capacity of the coolant in the coolant tank, and turn on the refrigeration machine (water pump) to ensure that the coolant circulates normally.

2. The system parameter interface and data should not be modified or deleted arbitrarily. If the machine malfunctions, operators should not open the electrical control cabinet. They can contact our after-sales service department or ask your professional electrical engineer to open it for inspection. Before inspection and repair, the main power must be turned off to confirm that the machine is not powered on before testing and repair.

3. The auxiliary worktable is milled regularly every 2 months, with a thickness of 0.05mm each time, to ensure the flatness of the worktable. The garbage in the T-shaped groove of the machine tool is cleaned up in a timely manner to prevent blockage.

4. The machine tool dust cover should be cleaned every week, especially if metal waste is not cleaned for a long time, it may scratch the dust cover and lose its dust prevention function.

5. Clean the guide surface of the machine tool in a timely manner before operation, and there should be no debris or garbage. Regularly check the oil level of the machine tool guide rail screw lubrication pump. Once it falls below the set oil level, the machine tool will sound an alarm and stop processing. It is strictly prohibited to directly unplug the oil pump power to continue processing.

6. Check the four corner cups of the machine tool every six months with an adjustable wrench for looseness to prevent resonance caused by uneven force on the machine tool during high-speed operation. After tightening, tighten the fixing nuts together!

7. The machine tool should not be idle for a long time, as it will make the system storage system inflexible and easily lead to the loss of system data. If the machine is not in operation for a long time, the spindle should be preheated for 30 minutes before operation.

8. Regularly clean every part of the machine tool. Lubricate the spindle components.

9. The machine tool should not operate for a long time, and the spindle motor must rest for 2 hours every day.

10. When an abnormality occurs, press the stop button in a timely manner and do not operate it casually.